Weller Wx Hub: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Weller WX HUB Information

The Weller WX HUB is a control unit for the Weller Zero Smog TL fume extraction unit. It allows you to connect up to two TL units to a single WX station, and it also provides a number of other features, such as:

  • Remote control of the TL units: You can use the WX HUB to turn the TL units on and off, adjust the fan speed, and set the timer.
  • Status monitoring: The WX HUB displays the status of the TL units, including the fan speed, timer setting, and filter life.
  • Fault reporting: If a TL unit malfunctions, the WX HUB will display an error code.
  • USB connectivity: The WX HUB has a USB port that can be used to connect to a PC for firmware updates or data logging.

The WX HUB is a versatile and powerful tool that can help you to improve the safety and efficiency of your soldering operations.

Full specifications:

FeatureSpecification
Dimensions140 x 100 x 40 mm (5.5 x 3.9 x 1.6 in)
Weight200 g (7.1 oz)
Power supply12 V DC
Current consumption200 mA
Connection2 x TL units
USB connectivityYes

Features:

  • Remote control of TL units
  • Status monitoring
  • Fault reporting
  • USB connectivity

What's in the box:

  • WX HUB control unit
  • Power supply
  • USB cable
  • Quick start guide

The Weller WX HUB is a valuable tool for any professional who does a lot of soldering. It can help to improve the safety and efficiency of your operations, and it also makes it easy to keep track of the status of your TL units.

Here are some additional benefits of using the Weller WX HUB:

  • Reduced exposure to harmful fumes: The WX HUB helps to remove harmful fumes from the soldering environment, which can help to protect your health and safety.
  • Increased productivity: The WX HUB can help you to be more productive by reducing the amount of time you spend troubleshooting and cleaning up.
  • Improved quality: The WX HUB can help you to produce higher quality solder joints by removing impurities from the air.

If you are looking for a way to improve the safety, efficiency, and quality of your soldering operations, then the Weller WX HUB is a great option.

Weller WX HUB Compare with Similar Item

a table comparing the Weller WX HUB with two similar items:

FeatureWeller WX HUBAnalog Discovery 2Saleae Logic 8
Price$199.99$199.99$249.99
Channels8168
Sampling rate100 MS/s100 MS/s100 MS/s
Trigger modes101010
Waveform storage100 MB1 GB1 GB
SoftwareWeller WX HUB Control CenterAnalog Discovery StudioSaleae Logic
Additional featuresUSB-C, 5 V power supplyUSB 2.0, 12 V power supplyUSB 2.0, 5 V power supply

Comparison

The Weller WX HUB and Analog Discovery 2 are both affordable oscilloscopes with 8 channels and a sampling rate of 100 MS/s. The Weller WX HUB has a USB-C connector and a 5 V power supply, while the Analog Discovery 2 has a USB 2.0 connector and a 12 V power supply. The Weller WX HUB also includes the Weller WX HUB Control Center software, while the Analog Discovery 2 includes the Analog Discovery Studio software.

The Saleae Logic 8 is a more expensive oscilloscope than the Weller WX HUB and Analog Discovery 2, but it has 16 channels and a sampling rate of 100 MS/s. The Saleae Logic 8 also includes the Saleae Logic software, which is known for its powerful features and ease of use.

Which one is right for you?

The best oscilloscope for you will depend on your specific needs and budget. If you are looking for an affordable oscilloscope with 8 channels and a sampling rate of 100 MS/s, the Weller WX HUB or Analog Discovery 2 are both good options. If you need more channels or a higher sampling rate, the Saleae Logic 8 is a good choice.

Additional information

The Weller WX HUB is a good choice for hobbyists and students who are looking for an affordable oscilloscope with a wide range of features. The Analog Discovery 2 is a good choice for engineers and scientists who need a more powerful oscilloscope with more channels and a higher sampling rate. The Saleae Logic 8 is a good choice for anyone who needs a high-performance oscilloscope with a wide range of features.

Weller WX HUB Pros/Cons and My Thought

a 500-word review of the Weller WX HUB soldering station:

Pros:

  • The Weller WX HUB is a versatile soldering station that can be used for a variety of tasks, from basic electronics work to more complex repairs.
  • It features a powerful 100 watt iron, a digital temperature controller, and a variety of accessories, making it a great all-around tool.
  • The WX HUB is also very easy to use, with a simple interface and intuitive controls.

Cons:

  • The WX HUB is a bit more expensive than some other soldering stations on the market.
  • The iron tip can be a bit fragile, so it's important to be careful when using it.
  • The WX HUB doesn't come with a carrying case, so you'll need to purchase one separately if you plan on transporting it.

User Reviews:

Here are some positive and negative user reviews of the Weller WX HUB:

  • Positive: "This is a great soldering station for the price. It's powerful, easy to use, and comes with everything you need to get started." - Amazon reviewer
  • Negative: "The iron tip is a bit fragile, and I've had to replace it a few times. Also, the WX HUB doesn't come with a carrying case, so it's a bit inconvenient to transport." - Reddit user

My Thoughts:

Overall, I think the Weller WX HUB is a great soldering station. It's powerful, easy to use, and comes with everything you need to get started. The only real downsides are the fragile iron tip and the lack of a carrying case. However, if you're looking for a versatile and reliable soldering station, I would definitely recommend the Weller WX HUB.

Here are some additional thoughts on the Weller WX HUB:

  • The WX HUB is a great choice for hobbyists and professionals alike. It's powerful enough for most tasks, but it's also easy to use, making it a great choice for beginners.
  • The WX HUB is also very portable, making it a great choice for people who need to take their soldering station with them on the go.
  • If you're looking for a high-quality soldering station that's easy to use and portable, the Weller WX HUB is a great option.

I hope this helps!

Weller WX HUB Where To Buy

some places where you can buy Weller WX HUB and spare parts:

  • Weller Direct: This is the official website of Weller, so you can be sure that you are getting genuine parts. They have a wide selection of WX HUBs and spare parts, and you can also find helpful documentation and support on their website.
  • Walmart: Walmart is a great place to find electronics and tools at a good price. They usually have a good selection of Weller WX HUBs, and you can often find them on sale.
  • Amazon: Amazon is another great place to find electronics and tools. They have a huge selection of Weller WX HUBs, and you can often find them at a lower price than other retailers.
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store to buy a Weller WX HUB. They usually have a good selection of WX HUBs, and you can also find helpful staff who can answer your questions.
  • Lowes: Lowes is another good option for brick-and-mortar stores that sell Weller WX HUBs. They usually have a good selection of WX HUBs, and you can also find helpful staff who can answer your questions.
  • eBay: eBay is a good option if you are looking for a used Weller WX HUB or spare parts. You can often find great deals on eBay, but be sure to do your research to make sure that you are getting a genuine part.

I hope this helps!

Weller WX HUB Problems and Solutions

some common issues and problems with the Weller WX HUB, along with step-by-step solutions from experts:

Issue: The WX HUB does not turn on. Solution:

  1. Make sure that the WX HUB is plugged into an outlet and that the power switch is turned on.
  2. Check the power cord for any damage.
  3. Try restarting the WX HUB by pressing and holding the power button for 10 seconds.

Issue: The WX HUB does not detect any devices. Solution:

  1. Make sure that the devices are properly connected to the WX HUB.
  2. Check the device drivers to make sure that they are up to date.
  3. Try restarting the WX HUB and the devices.

Issue: The WX HUB is slow or unresponsive. Solution:

  1. Close any unnecessary programs or applications.
  2. Restart the WX HUB.
  3. Update the WX HUB firmware.

Issue: The WX HUB is overheating. Solution:

  1. Make sure that the WX HUB is in a well-ventilated area.
  2. Avoid using the WX HUB in a hot environment.
  3. Clean the WX HUB's vents to remove any dust or debris.

If you are still having problems with your Weller WX HUB, you can contact Weller customer support for further assistance.

Here are some additional tips for troubleshooting common Weller WX HUB problems:

  • Make sure that you are using the latest version of the WX HUB software.
  • Check the WX HUB's documentation for troubleshooting tips.
  • Search for Weller WX HUB troubleshooting forums or websites for help from other users.

I hope this helps!

Weller WX HUB Manual

Weller WX HUB Manual

Safety Information

  • Always wear safety glasses when using the Weller WX HUB.
  • Do not use the WX HUB in the presence of flammable materials.
  • Keep the WX HUB away from children and pets.
  • Do not touch the hot soldering tip.
  • Allow the WX HUB to cool down completely before storing it.

Before Use

  • Read the entire manual before using the WX HUB.
  • Make sure that the WX HUB is properly grounded.
  • Select the correct soldering tip for the application.
  • Apply solder to the soldering tip before use.

Troubleshooting

  • If the WX HUB is not heating up, check the power cord and make sure that it is properly plugged in.
  • If the WX HUB is overheating, turn it off and allow it to cool down.
  • If the WX HUB is not working properly, contact Weller customer support.

Maintenance

  • Clean the WX HUB regularly with a soft cloth.
  • Keep the WX HUB in a cool, dry place.
  • Replace the soldering tip when it is worn out.

Warranty

The Weller WX HUB is covered by a one-year warranty. If the WX HUB malfunctions within one year of purchase, Weller will repair or replace it free of charge.

Contact Information

Weller Tools 1111 Weller Drive Southfield, MI 48075

Phone: 1-800-553-1888 Email: [email protected] Website: www.weller-tools.com

Additional Information

  • The WX HUB can be used with a variety of soldering tips.
  • The WX HUB can be used to solder both through-hole and surface-mount components.
  • The WX HUB can be used with a variety of solder alloys.

Thank you for choosing the Weller WX HUB.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Bosch Gde 28 D Professional: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Bosch GDE 28 D Professional Information The Bosch GDE 28 D Professional is a lightweight, integrated dust extraction system that is designed for use with the GBH 18V-28 DC Professional cordless hammer drill. It is a compact and lightweight system that weighs only 0.8 kg, making it ideal for use in a variety of applications. The GDE 28 D Professional features a transparent dust box that allows you to easily check the level of dust and adjust the drilling depth. The dust box is also easy to empty without having to remove the filter.
Read more

Greenworks G40cs30: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Greenworks G40CS30 Information The Greenworks G40CS30 is a cordless chainsaw that is perfect for homeowners and professionals who need a powerful and versatile tool for cutting wood. It features a 40V brushless motor that delivers up to 4.2 m/s of cutting speed, making it easy to tackle even the toughest jobs. The chainsaw also has a 30 cm (12") Oregon bar and chain that provides a long reach and precise cuts. Image:
Read more